< >

Staliness Steel Expansion Joint

Pipe in use process, will inevitably encounter heat bilges cold shrink, the heat-expansion and cold-contraction when not so obvious as rubber products, but when the pipes are in a state of heat or cools down, suddenly pipeline might suddenly long or short, this kind of situation is harmful for pipe, rubber expansion joint, used to prevent pipeline is damaged due to the heat bilges cold shrink. Rubber expansion joint is to protect the thermal expansion and contraction of the pipeline and especially exist. Each rubber expansion joint can be extended or shortened. When the pipeline is heated and expanded, the rubber expansion joint will be shortened.

Contact Now

Product Details

Expansion joints are devices containing a bellows membrane that are designed to absorb dimensional changes, such as those that occur due to thermal expansion or contraction of a pipeline, duct or vessel.

Stainless steel 304 Rubber Expansion Joint For Pipe Line has been widely used in the chemical industry, oil industry,construction, water supply drainage, fire production industry, etc.
Rubber Materials: NR, NBR, CR, EPDM, PTFE, etc. Flange Materials: 304 stainless steel, Inconel 625, carbon steel, PVC.
Standard: GB, ISO, DIN, ANSI, BS, JIS, as well as customers'special demand.

Expansion Joint.jpg

Specification:

Item	Specification
Operating condition	PN: 1.0/1.6/2.5 Mpa
The water temperature	up to 120℃
Material	EPDM/NBR/NR body with Carbon steel flange
Size	DN20 – DN3000
Structure	Single Sphere, Double Sphere or more
Standard of Flange	BS, DIN, ANSI, JIS or others provided drawing samples
Media	Hot Air, SO2, Steam, Water, Oil, Acid,Gas And etc.
Threads	DIN, BSPT, BSP, NPS, NPT, Metric, (ISO7/1, DIN 2999, ANSI B1.20.1)
Surface	Galvanized, Epoxy

1. it is strictly prohibited to install over the displacement limit.
2. The mounting bolts should be symmetrical and gradually tightened to prevent partial leakage.
3. Working pressure above 1.6.MPa, the mounting bolts should have elastic pressure pads to prevent the bolts from loosening during operation.
4. When installing vertically, the joint pipe should have vertical force support at both ends, and the anti-pull device can be adopted to prevent the work from being pulled off.
5. The rubber joint installation site should be away from the heat source. Ozone area. It is strictly forbidden to expose the radiation and use media that does not meet the requirements of this product.