Expansion Joint with Flanged Type-manufacture,factory,supplier from China
(Total 10 Products for Expansion Joint with Flanged Type)
Expansion joints are devices containing a bellows membrane that are designed to absorb dimensional changes, such as those that occur due to thermal expansion or contraction of a pipeline, duct or vessel. Stainless steel 304 Rubber Expansion Joint For Pipe Line has been widely used in the chemical industry, oil industry,construction, water supply drainage, fire production industry, etc.Rubber Materials: NR, NBR, CR, EPDM, PTFE, etc.
Contact Now
Expansion joints are devices containing a bellows membrane that are designed to absorb dimensional changes, such as those that occur due to thermal expansion or contraction of a pipeline, duct or vessel. Stainless steel 304 Rubber Expansion Joint For Pipe Line has been widely used in the chemical industry, oil industry,construction, water supply drainage, fire production industry, etc.Rubber Materials: NR, NBR, CR, EPDM, PTFE, etc.
Contact Now
Flange standard Customized installation length Customized bellows and bolt materials：304/316/321/310S;- Flange Standards Support Customization;- Installation Length Support Customization;- Material of bellows and bolts304/316/321/310S
Contact Now
Resilient seated butterfly valve is a double flanged design which can be used for dead-end service .This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system
Contact Now
Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards.
Contact Now
100% bi-directional tight close-off. set up with out restrction in route of drift.decreased weight and overall dimensions.low pressure loss and reduced energy prices.
Contact Now
This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking wate
Contact Now
Resilient seated butterfly valve is a double flanged design which may be used for dead-give up carrier .this butterfly valve collection has some of the layout functions and benefits including high cv rankings ,minimum elements exposed to the road media ,greater reliability and a validated report of long provider life .a primary design advantage of this valve product traces is international compatibility.Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system
Contact Now
It is easily installed with two grooved end couplings.
Contact Now
Relate News
FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.
Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.
1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden.
2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top).
3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force).
4. Gate valve with transmission mechanism shall be installed according to the product instruction manual.
5.
Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.
Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve. automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve. disc movement is split into lifting and swing. elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc. the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect). valve
Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.
The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.
Y-kind strainer as an fundamental high-efficiency filtration system within the purification system engineering, has performed a exquisite position within the remedy of domestic wastewater and business sewage. with various blessings in layout and alertness, it's miles now desired.
Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.
1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.
