EPDM seat Lug Butterfly Valve-manufacture,factory,supplier from China

(Total 10 Products for EPDM seat Lug Butterfly Valve)

Alloy Staliness Steel Grooved End Butterfly Valve

Grooved End Butterfly Valve ductile iron +EPDM seat

Butterfly valve offers economical,efficient,and reliable service for grooved end piping applications.It is easily installed with two grooved end couplings.

Contact Now

Wafer Type Single Board Check Valve Aluminum

Wafer Type Single Board Check Valve Stainless Steel

Take a look at valve refers to the outlet and ultimate parts of the round disc and through its own weight and media stress generated movement to block the media float again valve. automatic valve magnificence, also referred to as test valve, one-way valve, backflow valve or isolation valve.Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media

Contact Now

Lug Type Butterfly Valve

Wide selection of materials, applicable for diverse medium.Small in size and mild in weight, easy set up and maintenance.it may be established anyplace wanted.Easy and compact production,Drift block is small.notable regulation overall performance.Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 520

Contact Now

Aluminum Butterfly Valve Staliness Steel

Aluminum Butterfly Valve Usual Flanged

The anti-condensation butterfly valve usually refers to the butterfly valve whose body is made of aluminum alloy.

Contact Now

Staliness Steel Electric Butterfly Valve

1, the electric butterfly valve is convenient to open and close quickly, labor-saving, fluid resistance is small, can often operate. 2, electric butterfly valve simple structure, small size, light weight. 3, electric butterfly valve can transport mud, at the mouth of the least liquid accumulation.

Contact Now

EPDM Seat U Type Butterfly Valve

Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking waterDry powder Food and beverage Gas plantsHAVC Mining industry Paper industry Sand handling Seawater Su

Contact Now

PTFE Seat Lug Type Butterfly Valve

Huge choice of substances, relevant for diverse medium.Small in length and light in weight, smooth set up and protection.it can be set up wherever needed.Simple and compact construction,Go with the flow block is small.amazing law overall performance.Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO

Contact Now

Vulcanization Seat Butterfly Valve DN900

Material:Body: Cast Iron/Ductile Iron/Cast SteelDisc: DI+Ni/SS304/SS316/AL-BZStem: SS416/SS304/SS316/17-4PHSeat: EPDM/NBR/VITON/PTFE/CRSuitable temperature: -40℃-120℃Size: 300mm butterfly valvePressure: 1.0Mpa,1.6Mpa,150psi,200psi

Contact Now

Pneumatic Butterfly Valve

The pneumatic butterfly valve is composed of a pneumatic actuator and a butterfly valve. The pneumatic butterfly valve is a pneumatic valve that uses a circular butterfly plate that rotates with the valve stem to realize the opening and closing. It is used more and more on medium-bore pipes. Pneumatic butterfly valve classification: stainless steel pneumatic butterfly valve, hard seal pneumatic butterfly valve, soft seal pneumatic butterfly valve, carbon steel pneumatic butterfly valve.

Contact Now

Wafer Type Butterfly Valve CF8M Disc EPDM Seat Gear Operator

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contact Now

Relate News

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Advantages and Disadvantages of Butterfly Valve

Advantage 1. The opening and closing is convenient, quick, labor-saving, low in fluid resistance, and can be operated frequently.2. Simple structure, small overall size, short structural length, small volume and light weight, which is suitable for large-diameter valves.3. Mud can be transported, and the liquid accumulated at the pipe mouth is the least.4. Under low pressure, good sealing can be achieved.5. Good adjustment performance. 6. When fully opened, the effective circulation area of the valve seat channel is large, and the fluid resistance is small.7.

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

Background of Butterfly Valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

The Difference Between Ball Valve and Butterfly Valve

1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.

The Difference Between Butterfly Valve With a pin and Without Pin

FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.

Introduction of Butterfly Valve Characteristics

1. Butterfly valve has the characteristics of simple structure, small volume, light weight, low material consumption, small installation size, quick switch, 90 reciprocating rotation and small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline, and has good fluid control characteristics and closing and sealing performance.2. Butterfly valves can transport mud, and the liquid accumulated at the pipe mouth is the least. Under low pressure, good sealing can be achieved. Good adjustment performance.3.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.

The Differences Between Soft Seal Butterfly Valve And Hard Sear

Hard seal butterfly valve is called "hard seal" when both sides of the seal are made of metal or other hard materials. The sealing function of this kind of seal is poor, but it is resistant to high temperature, wear and tear, and has good mechanical function.

China Refrigation Equipment Exhibition

The Chinese Refrigation Equipment Exhibition is the most special exhibition in Refrigation field.Our Diefei Brand Check valve and Butterfly valve is an important part of this Exhibition.We have the expertise and experience to produce,also have a big After-service team . We get the high apprecition from our customers.