ANSI 125-manufacture,factory,supplier from China

(Total 10 Products for ANSI 125)

Lug Type Butterfly Valve ANSI 125/ANSI150

Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contact Now

ANSI 125 Butterfly Valve Lever WECO Model

100% bi-directional tight close-off. set up with out restrction in route of drift.decreased weight and overall dimensions.low pressure loss and reduced energy prices.

Contact Now

Wafer type butterfly valve

Design CodeAPI 609Inspection &TestAPI 598End StandardDIN PN10,DIN PN16, ANSI B16.1, JIS 10KFace to FaceAPI 609MaterialBodyCast Iron/Ductile Iron/Cast SteelDiscDI+Ni/SS304/SS316/AL-BZStemSS416/SS304/SS316/17-PHSeatEPDM/NBR/VITON/PTFE/CROperationHandlever GearboxSizeDN25-DN1200

Contact Now

ANSI 125/DIN PN10/16 JIS 10K/JIS 5K Butterfly Valve Usual Flange

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contact Now

Flanged Type Stainless Steel Butterfly Valve DIN PN10-16 10-16

Flanged Type Stainless Steel Butterfly Valve DIN PN10-16 /ANSI 125/ANSI150

This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking wate

Contact Now

Without Pin Wafer type Butterfly Valve

Contact Now

Bronze Disc Center line Flange Type Butterfly Valve Vulcanization seat

Sizes:DN100-DN1800Pressure Class:PN10 OR PN16Design:API609 BSEN593 BS5155Test: API598 ISO5208 EN12266-1Flange Connection: DIN2501 PN10/16,ISO7005-2 PN10/16, EN1092-2 PN10/16,ANSI B16.5 class 150LB ANSI B16.47 Series A class 150LB,ANSI B16.1 MSS SP44 class150LB WAAW C207Top Flange:ISO5211Face to Face:EN558-1 series 14,ISO5752 Series 14NameMaterialBodyCast Iron Ductile Iron Carbon Steel DiscDuctile Iron Carbon Steel Stainless Steel AL-BronzeShaftStainless Steel Monel K500SeatBUNA NBR EPDM VITON PTFE HEPDM Neoprene

Contact Now

Flange Type Butterfly Valve Flanged Type

Flange Type Butterfly Valve Bronze material for sea water

This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.Sizes:DN100-DN1800Pressure Class:PN10 OR PN16Design:API609 BSEN593 BS5155Test: API598 ISO5208 EN12266-1Flange Connection: DIN2501 PN10/16,ISO7005-2 PN10/16, EN1092-2 PN10/16,ANSI B16.5 class 150LB ANSI B16.47 Series A class 150LB,ANSI B16.1 MSS SP44 class150LB WAAW C207Top Flange:ISO5211Face to Face:EN558-1 s

Contact Now

ANSI Gate Valve

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards.

Contact Now

Short Neck Butterfly Valve

Size:2"-12"Pressure:200PSI/150PSIANSI Class: Class 125/Class 150Features: Short Neck,Two shaft/Pinless Type/ Notched BodyMaterial:Body: Cast Iron A126/ Ductile iron ASTM A536Disc: Ductile Iron (Ni Plated),Ductile Iron (Nylon Coated),Aluminum Bronze,CF8M / SS316Seat: E.P.D.M, BUNA-N,F.K.M./VITON, P.T.F.E (Teflon)Stem: Stainless Steel 416/ Stainless Steel 304Stem Style:Doubel D / Square ShaftOperator: Lever/ Gear / Actuator

Contact Now

Relate News

Introduction of Butterfly Valve Characteristics

1. Butterfly valve has the characteristics of simple structure, small volume, light weight, low material consumption, small installation size, quick switch, 90 reciprocating rotation and small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline, and has good fluid control characteristics and closing and sealing performance.2. Butterfly valves can transport mud, and the liquid accumulated at the pipe mouth is the least. Under low pressure, good sealing can be achieved. Good adjustment performance.3.

The Difference Between Butterfly Valve With a pin and Without Pin

FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.

The Differences Between Soft Seal Butterfly Valve And Hard Sear

Hard seal butterfly valve is called "hard seal" when both sides of the seal are made of metal or other hard materials. The sealing function of this kind of seal is poor, but it is resistant to high temperature, wear and tear, and has good mechanical function.

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.

Difference Between Butterfly Valve and Gate Valve

Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.

Matters Needing Attention in the Use of Gate Valves

1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.

Advantage of JIS Y-Strainer Ductile Iron Body

Y-kind strainer as an fundamental high-efficiency filtration system within the purification system engineering, has performed a exquisite position within the remedy of domestic wastewater and business sewage. with various blessings in layout and alertness, it's miles now desired.

Characteristics of Strainer Valve

The filter net adopts stainless steel double-layer net structure, which is durable, advanced in structure, small in flow resistance, convenient in sewage discharge, etc. It can be used in water, steam, oil, nitric acid, urea, oxidizing medium and other media. According to the user's needs, the mesh number of filter screen should be set, generally, the water supply network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil supply network is 100-480 mesh.